Enterasys Networks 4G4205-72, 4G4285-49 Recommended Shutdown Procedure Using OFFLINE/RESET Switch

Overview of DFE Module Shutdown Procedure
Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide 4-11
Figure 4-3 OFFLINE/RESET Switch
Recommended Shutdown Procedure Using OFFLINE/RESET
Switch
BeforepullingaDFEmoduleoutofachassis,
pressortaponitsOFFLINE/RESETswitchforlessthan1second.
ItsCPULEDchangesfromsolidgreentoblinkingbetweengreenandamber,indicating
thattheDFEmoduleisshuttingdown.AttheendoftheDFEmoduleshutdownroutine,
theCPULEDchangestoa67%/33%sequenceofamber/off,respectively,indicatingthe
moduleisinahaltstate.InthistimeitissafetorestartorremovetheDFEmodulefrom
thechassis.
WhenacontrolledshutdownisinitiatedfromtheOFFLINE/RESETswitch,youhave60
secondsfromthetimetheCPUstartsflashingamber/offuntilthetimethedeviceis
automaticallyrestarted.
1OFFLINE/RESET switch (in similar location on all DFE modules)
COM
OFFLINE / RESET
CPU
MGMT
GROUP 1 GROUP 2 GROUP 3
1X
À
4G4205-72
Gb ENET
À
CPU
POE
1X
G
R
O
U
P
1
OFFLINE/
RESET
COM
MGMT
GROUP
SELECT
GROUP
1
2
3
4
5
6
1
2
3
4
4G4285-49
Gb ENET
Caution: Do not pull any DFE module out of an operating chassis before it has completed
its shutdown routine.
Precaución: No retire los módulos DFE del chasis en funcionamiento hasta que no se
haya terminado con la rutina de apagado.
Note: The only safe time to pull a DFE module out of the chassis is when the CPU LED is
blinking amber. Otherwise, system operation will be interrupted.