Enterasys Networks DFE-Gold Series - page 403

show garp timer Enabling/Disabling GVRP
Enterasys Matrix DFE-Gold Series Configuration Guide 7-25
Parameters
Defaults
Ifport‐stringisnotspecified,GARPtimerinformationwillbedisplayedforallports.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayGARPtimerinformationonFastEthernetports1through10
inmodule1:
Matrix(rw)->show garp timer fe.1.1-10
Port based GARP Configuration: (Timer units are centiseconds)
Port Number Join Leave Leaveall
----------- ---------- ---------- ----------
fe.1.1 20 60 1000
fe.1.2 20 60 1000
fe.1.3 20 60 1000
fe.1.4 20 60 1000
fe.1.5 20 60 1000
fe.1.6 20 60 1000
fe.1.7 20 60 1000
fe.1.8 20 60 1000
fe.1.9 20 60 1000
fe.1.10 20 60 1000
Table 7‐5providesanexplanationofthecommandoutput.Fordetailsonusingthesetgvrp
commandtoenableordisableGVRP,referto“setgvrp”onpage 7‐26.Fordetailsonusingtheset
garptimercommandtochangedefaulttimervalues,referto“setgarptimer”onpage 7‐27.
port‐string (Optional)DisplaysGARPtimerinformationforspecificport(s).Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.
Note: For a functional description of the terms join, leave, and leaveall timers, refer to the standard
IEEE 802.1Q documentation, which is not supplied with this device.
Table 7-5 show gvrp configuration Output Details
Output... What it displays...
Port Number Port designation. For a detailed description of possible port-string
values, refer to “Port String Syntax Used in the CLI” on page 4-2.
Join Join timer setting.
Leave Leave timer setting.
Leaveall Leavall timer setting.