Enterasys Networks VHSIM2-A6DP - page 66

ATM Port Redundancy Configuration Screen

3-32 Local Management

Primary Port (Modifiable)

Used to determine which APIM installed in the VHSIM2-A6DP will be the primary port. En teri ng

1 in this field signifies that the APIM in slot APIM 1 on the VHSIM2-A6DP will be the primary

port. Entering 2 signifies that the APIM in slot APIM 2 on t he VHSIM2-A6 DP wil l be the primar y

port. The default setting for this field is1.

Active Port (Modifiable)

Displays which APIM is currently acting as the active port for the VHSIM2-A6DP. The Active

port field displays 1 or 2. This field may be configured manually to “1” or “2”, however, it is

possible this value may change if the Activation of redundant port or Revert to primary port fields

are set to “Automatic”.

Activation of redundant port (Toggle)

Used to configure how the VHSIM2-A6DP will activate the redundant port if a problem arises

with the primary port. The field toggles between Automatic and Manual. The default setting for

this field is Automatic.

Revert to Primary port (Toggle)

Used to configure how the VHSIM2-A6DP will reactivate the primary port once any problems

have been resolved. This field toggles between Automat ic and Ma nual . The default setting for this

field is Automatic.

Periodic test status (Toggle)

Used to enable or disable the redundancy test feature of the VHSIM2-A6DP. This field toggles

between Enabled and Disabled. The default setting for this field is Enabled.

Periodic test time (Modifiable)

Allows the user to set the time of day that the VHSIM2-A6DP will perform APIM redundancy

tests. The default setting for this field is 01:00.00 (1 :00 A.M.). The available range for this field is

00:00.00 (12:00A.M.) to 23:59.59 (11:59:59 P.M.).

Port Usability Status (Read-Only)

Displays the current status of redundant ports of the VHSIM2-A6DP.

NOTE: Some status results may display a “port unusable” message. This does NOT

necessarily indicate a hardware failure. This test result may be due to no link to the

APIM, faulty cabling, etc. If the VHSIM2-A6DP or an APIM has a hardware failure, it will

be reflected in their LEDs. Refer to Chapter 4 for details. A “port unusable” message

only indicates that the port may not be used for redundancy.

Contents

Main Page i NOTICE ELECTRICAL HAZARD: Only qualified person nel should perform installation procedures. ii FCC NOTICE INDUSTRY CANADA NOTICE VCCI NOTICE iii ENTERASYS NETWORKS, INC. PROGRAM LICENSE AGREEMENT iv Page vi DECLARATION OF CONFORMITY Contents vii Contents ABOUT THIS GUIDE 1 2 3 viii Contents Contents ix 4 A INDEX B xFigures Figures Page Page About This Guide WHO SHOULD USE THIS GUIDE STRUCTURE OF THIS GUIDE RELATED MANUALS Related Manuals xv DOCUMENT CONVENTIONS The following conventions are used throughout this document: Page Introduction 1.1 OVERVIEW Page 1.2 GETTING HELP Page Installation 2.1 UNPACKING THE VHSIM2-A6DP 2.2 INSTALLING APIMs Page Installing APIMs 2-4 Installation 4. Align the APIM connector with the VHSIM2-A6DP connector pins as shown in Figure2-2. 2.3 INSTALLING VAPIMs Page Installing VAPIMs Installation 2-7 4. Align the VAPIM connectors into the VHSIM2-A6DP connectors as shown in Figure2-4. 2.4 INSTALLING A VHSIM 2.4.1 Installing a VHSIM2-A6DP in an Interface Module Page Installing a VHSIM 2-10 Installation Place the VHSIM behind the module faceplate. See Figure2-6. 2.4.2 Installing a VHSIM2-A6DP in a Standalone Device Page Local Management 3.1 USING LOCAL MANAGEMENT SCREENS 3.1.1 Local Management Screen Elements Using Local Management Screens Local Management 3-3 Figure 3-1 Example of a Local Management Screen NOTE: Only the password, configuration and status screens have event message fields. Page 3.1.2 Local Management Keyboard Conventions Using Local Management Screens 3-6 Local Management 3.1.3 Navigating Local Management Screens Figure 3-2 VHSIM2-A6DP Local Management Screen Hierarchy 3.1.3.1 Selecting Local Management Menu Screen Items 3.1.3.2 Exiting Local Management Screens 3.2 ACCESSING THE VHSIM2-A6DP ATM SCREEN Page 3.3 ATM CONNECTIONS SCREEN ATM Connection Setup Screen Local Management 3-11 3.4 ATM CONNECTION SETUP SCREEN Figure 3-5 ATM Connection Setup Screen Page Page 3.5 TRAFFIC MANAGEMENT PVC PRIORITY ASSIGNMENTS Page Page 3.5.1 Adding Traffic Management PVC Priority Assignments Page 3.5.2 Modifying an Entry (Vport) 3.5.3 Deleting an Entry (Vport) 3.5.4 Traffic Management PVC Priority Assignments Screen Example 3.6 ADD/DELETE ENTRY SCREEN 3.6.1 Adding an Entry (PVC) 3.6.2 Modifying an Entry (PVC) 3.6.3 Deleting an Entry (PVC) 3.7 ATM CONNECTION SETUP BY VIRTUAL INTERFACE SCREEN Page 3.7.1 Selecting a Virtual Interface 3.8 PHYSICAL PORT CONFIGURATION MENU SCREEN 3.9 PORT FRAMER CONFIGURATION SCREEN Page 3.9.1 Configuring an APIM 3.10 ATM PORT REDUNDANCY CONFIGURATION SCREEN Page Page 3.10.1 Setting the Redundancy Status 3.10.2 Setting the Primary Port 3.10.3 Setting the Active Port 3.10.4 Setting the Activation of Redundant Port Field 3.10.5 Setting the Revert to Primary Port Field 3.10.6 Setting the Periodic Test Status Field 3.10.7 Setting the Periodic Test Time 3.10.8 Using the TEST PORTS NOW Command 3.10.9 Using the RESET TO FACTORY DEFAULTS Command 3.11 LAN EMULATION CLIENTS SCREEN Page 3.12 LEC TABLE SCREEN Page 3.13 LEC ADMINISTRATION SCREEN Page Page Page 3.13.1 Changing the LEC Status of an Existing LEC 3.13.2 Configuring a New LEC Automatically 3.13.3 Configuring a New LEC Manually Page 3.13.4 Modifying an Existing LEC 3.13.5 Deleting an Existing LEC 3.14 LEC PROPERTIES SCREEN Page Page 3.14.1 Viewing Multiple ELANs 3.15 LEC ARP CACHE SCREEN Page 3.15.1 Performing a Search 3.16 LEC PRIORITY QUEUES SCREEN Page 3.16.1 Assigning Priorities to a LEC 3.17 SIGNALLING SCREEN Page 3.17.1 Changing the UNI Version 3.17.2 Changing the ILMI Status to Disabled 3.17.3 Changing the UNI Status 3.17.4 Restarting UNI 3.17.5 Restarting the ILMI 3.18 TRAFFIC MANAGEMENT SCREEN Page 3.18.1 Setting up a Descriptor Profile 3.18.2 Modifying a Descriptor Profile 3.18.3 Deleting a Descriptor Profile 3.19 DISCOVERY ELAN SETUP SCREEN Page 3.19.1 Assigning the VHSIM2-A6DP to a Discovery ELAN LANVIEW LEDs 4-1 LANVIEW LEDs 4.1 VHSIM2-A6DP LEDs Refer to Tabl e 4-1 and Tab le 4-2 for a description of VHSIM2-A6DP and APIM/VAPIM LEDs. Page A VHSIM2-A6DP Specifications A.1 SPECIFICATIONS Page B APIM and VAPIM Specifications B.1 APIM-21 SPECIFICATIONS B.2 APIM-29 SPECIFICATIONS B.3 APIM-29LR SPECIFICATIONS B.4 APIM-22 SPECIFICATIONS B.5 APIM-67 SPECIFICATIONS Page B.6 VAPIM-31 SPECIFICATIONS B.7 VAPIM-39 SPECIFICATIONS B.8 VAPIM-39LR SPECIFICATIONS Page Index-1 Index A D E F K L N O R U V