Enterasys Networks VHSIM2-A6DP - page 76

LEC Administration Screen

3-42 Local Management

LES ATM Address (Modifiable)

The address of the LAN Emulation Server with which the LEC registers. If the LEC is configured

manually, the LES ATM Address must be supplied by the user.

The following list explains each of the LEC Administration screen fields and commands:

LEC Index (Read-Only/Modifiable)

Used to identify this LEC in the ATM Forum’s LEC MIB. This value is provided dynami cally and

is not modifiable by the user. This field is use d to enter the inde x o f the LEC that will be vie wed or

changed while in MODIFY MODE.

LEC Status (Toggle)

Displays the current status of this LEC. This field displays “active” or “Not In Service”. For

instructions on changing the LEC status re fer to Section 3.13.1.

LANE Version (Toggle)

This field toggles between 2.0 and 1.0 with a default value of 2.0.

Configure LEC (Toggle)

Used to specify if the LEC is configured manually by the user, or automatically by the

VHSIM2-A6DP. This field toggles between Automatic and Manual. For instructions on how to

configure the LEC automatically and manually, refer to Section 3.13.2 and Section 3.13.3.

ELAN Name (Modifiable)

Used to provide a user-specified ELAN for this LEC to join. This field is modifiable when the LEC

is configured in both automatic and manual mode.

MTU Size (Toggle)

Used to define the maximum MTU size that this LEC allows to be used. This field toggles between

[1516], [1580], and [Unspecified], with [1516] being the default value.

Selective Multicast (Toggle)

This field toggles between Disable and Enable, with a default value of Disable. The Selective

Multicast field is specific to LANE 2.0, and is not supported if LANE 1.0 is used.

LLC Multiplex Capable (Toggle)

This field toggles between Disable and Enable, with a default value of Disable. The Selective

Multicast field is specific to LANE 2.0, and is not supported if LANE 1.0 is used.

NOTE: If the LEC is created manually, the name entered in the ELAN Name field is the

ONLY ELAN the LEC will join. The LEC will not take another ELAN name from the LES.

Contents

Main Page i NOTICE ELECTRICAL HAZARD: Only qualified person nel should perform installation procedures. ii FCC NOTICE INDUSTRY CANADA NOTICE VCCI NOTICE iii ENTERASYS NETWORKS, INC. PROGRAM LICENSE AGREEMENT iv Page vi DECLARATION OF CONFORMITY Contents vii Contents ABOUT THIS GUIDE 1 2 3 viii Contents Contents ix 4 A INDEX B xFigures Figures Page Page About This Guide WHO SHOULD USE THIS GUIDE STRUCTURE OF THIS GUIDE RELATED MANUALS Related Manuals xv DOCUMENT CONVENTIONS The following conventions are used throughout this document: Page Introduction 1.1 OVERVIEW Page 1.2 GETTING HELP Page Installation 2.1 UNPACKING THE VHSIM2-A6DP 2.2 INSTALLING APIMs Page Installing APIMs 2-4 Installation 4. Align the APIM connector with the VHSIM2-A6DP connector pins as shown in Figure2-2. 2.3 INSTALLING VAPIMs Page Installing VAPIMs Installation 2-7 4. Align the VAPIM connectors into the VHSIM2-A6DP connectors as shown in Figure2-4. 2.4 INSTALLING A VHSIM 2.4.1 Installing a VHSIM2-A6DP in an Interface Module Page Installing a VHSIM 2-10 Installation Place the VHSIM behind the module faceplate. See Figure2-6. 2.4.2 Installing a VHSIM2-A6DP in a Standalone Device Page Local Management 3.1 USING LOCAL MANAGEMENT SCREENS 3.1.1 Local Management Screen Elements Using Local Management Screens Local Management 3-3 Figure 3-1 Example of a Local Management Screen NOTE: Only the password, configuration and status screens have event message fields. Page 3.1.2 Local Management Keyboard Conventions Using Local Management Screens 3-6 Local Management 3.1.3 Navigating Local Management Screens Figure 3-2 VHSIM2-A6DP Local Management Screen Hierarchy 3.1.3.1 Selecting Local Management Menu Screen Items 3.1.3.2 Exiting Local Management Screens 3.2 ACCESSING THE VHSIM2-A6DP ATM SCREEN Page 3.3 ATM CONNECTIONS SCREEN ATM Connection Setup Screen Local Management 3-11 3.4 ATM CONNECTION SETUP SCREEN Figure 3-5 ATM Connection Setup Screen Page Page 3.5 TRAFFIC MANAGEMENT PVC PRIORITY ASSIGNMENTS Page Page 3.5.1 Adding Traffic Management PVC Priority Assignments Page 3.5.2 Modifying an Entry (Vport) 3.5.3 Deleting an Entry (Vport) 3.5.4 Traffic Management PVC Priority Assignments Screen Example 3.6 ADD/DELETE ENTRY SCREEN 3.6.1 Adding an Entry (PVC) 3.6.2 Modifying an Entry (PVC) 3.6.3 Deleting an Entry (PVC) 3.7 ATM CONNECTION SETUP BY VIRTUAL INTERFACE SCREEN Page 3.7.1 Selecting a Virtual Interface 3.8 PHYSICAL PORT CONFIGURATION MENU SCREEN 3.9 PORT FRAMER CONFIGURATION SCREEN Page 3.9.1 Configuring an APIM 3.10 ATM PORT REDUNDANCY CONFIGURATION SCREEN Page Page 3.10.1 Setting the Redundancy Status 3.10.2 Setting the Primary Port 3.10.3 Setting the Active Port 3.10.4 Setting the Activation of Redundant Port Field 3.10.5 Setting the Revert to Primary Port Field 3.10.6 Setting the Periodic Test Status Field 3.10.7 Setting the Periodic Test Time 3.10.8 Using the TEST PORTS NOW Command 3.10.9 Using the RESET TO FACTORY DEFAULTS Command 3.11 LAN EMULATION CLIENTS SCREEN Page 3.12 LEC TABLE SCREEN Page 3.13 LEC ADMINISTRATION SCREEN Page Page Page 3.13.1 Changing the LEC Status of an Existing LEC 3.13.2 Configuring a New LEC Automatically 3.13.3 Configuring a New LEC Manually Page 3.13.4 Modifying an Existing LEC 3.13.5 Deleting an Existing LEC 3.14 LEC PROPERTIES SCREEN Page Page 3.14.1 Viewing Multiple ELANs 3.15 LEC ARP CACHE SCREEN Page 3.15.1 Performing a Search 3.16 LEC PRIORITY QUEUES SCREEN Page 3.16.1 Assigning Priorities to a LEC 3.17 SIGNALLING SCREEN Page 3.17.1 Changing the UNI Version 3.17.2 Changing the ILMI Status to Disabled 3.17.3 Changing the UNI Status 3.17.4 Restarting UNI 3.17.5 Restarting the ILMI 3.18 TRAFFIC MANAGEMENT SCREEN Page 3.18.1 Setting up a Descriptor Profile 3.18.2 Modifying a Descriptor Profile 3.18.3 Deleting a Descriptor Profile 3.19 DISCOVERY ELAN SETUP SCREEN Page 3.19.1 Assigning the VHSIM2-A6DP to a Discovery ELAN LANVIEW LEDs 4-1 LANVIEW LEDs 4.1 VHSIM2-A6DP LEDs Refer to Tabl e 4-1 and Tab le 4-2 for a description of VHSIM2-A6DP and APIM/VAPIM LEDs. Page A VHSIM2-A6DP Specifications A.1 SPECIFICATIONS Page B APIM and VAPIM Specifications B.1 APIM-21 SPECIFICATIONS B.2 APIM-29 SPECIFICATIONS B.3 APIM-29LR SPECIFICATIONS B.4 APIM-22 SPECIFICATIONS B.5 APIM-67 SPECIFICATIONS Page B.6 VAPIM-31 SPECIFICATIONS B.7 VAPIM-39 SPECIFICATIONS B.8 VAPIM-39LR SPECIFICATIONS Page Index-1 Index A D E F K L N O R U V