Enviro 50-029 owner manual Initial Installation, Hearth Mount Installation

Initial Installation

HEARTH MOUNT INSTALLATION:

This unit may be installed as a hearth mounted unit.

Install two 3’ inch pipes up the chimney to a seal plate and cap assembly, one exhaust pipe, and one air intake pipe

Using venting manufactures coaxial to co-linear adapters at the unit and at the chimney termination. Maximum vertical chimney height 15 feet (4.57 m)

	Seal Plate &
	Cap Assembly
2"-3" (51mm-76mm)
Collinear Pipes
	15 feet (4.57m)
	Maximum
Existing Masonry	Vertical Venting
Chimney
Lock Damper in
the Open Position
	Coaxial to
If installed	Collinear
	Adapter
on a carpeted
surfacea hearth
is required

Figure 28: Hearth Mount Installation.

22