Installation
OPTIONAL PANEL KIT:
This kit must be installed before the unit is started.
Tools Required:
Kit Components:
Quantity | Description |
|
|
1 | Left Cab Panel |
|
|
1 | Right Cab Panel |
|
|
1 | Hopper Lid |
|
|
20 | #8 |
|
|
2 | Hopper Bracket |
|
|
2 | Bushing 1⁄4” O.D. x 1⁄8” long |
|
|
Figure 30: Screws above door top corner.
Please ensure that all components are supplied with this kit. If components are missing or have been damaged, contact your dealer, distributor or courier company before starting this installation.
Figure 31: Screw behind ash box.
Installing the Panels:
1. Remove the screws above the door on both sides (Figure 30).
2. Ensure the screws behind the ash box, one on each side (Figure 31) and the three (3) on each side at the back (Figure 32) are loosened.
3. Slide the three (3) slots at the back of the cab panels under the three (3) screws at the back.
4. Optional for Left Side: Line up the slider rod with the hole in the cab panels, slide it through, and install the knob.
5. Slide the front of the cab panels over the screw behind the ash box.
6. Install the screw above the door and tighten all screws.
Figure 32: Screws at back of the cab side.
21
