| Installation |
| |
| Fan |
|
|
| Black |
|
|
Fan temperature |
|
| |
sensor | Black | Black | |
| Black | ||
|
|
| |
| Rocker Switch | Black | Black |
| Manual | White |
|
| Off |
| |
|
| Fan | |
| Auto |
| |
Black |
| controller | |
|
| ||
|
| Power Supply |
|
Figure 24: Fireplace Insert Fan Kit Wiring Diagram.
FAN REMOVAL:
The Insert comes with the fan assembled installed in the left shroud.
1)Disconnect all electrical connections for the fan kit.
2)Remove the four (4) 1⁄2” hex head screws that hold the fan mounting plate to the shroud. If doing a fan only replacement, remove the four (4)
3)Remove the fan control knob and nut from the front of the shroud and pull the controls out the back.
4)Install the fan kit into the new shroud by following reversing steps 1 to 3. Refer to FAN WIRING DIAGRAM to ensure the fan is reconnected properly.
Left Shroud
Mounting Plate
Fan Temperature
Sensor
Fan
Figure 25: Insert Unit with Fan.
24
