Removal of Face | Enviro 1700-V Insert, Venice, 1200-V Insert

REMOVAL OF FACE:

1. Remove the cast top from the unit (lift up and forward)

2. Lift up and forward on the unit face, the entire face and surround panel will come away from the unit.

Figure 26: Removal of Face.

INSTALLATION OF THE SURROUND PANEL:

1.Loosen (but do not remove) the four (4) 1⁄4” screws holding the cast top.

2.List the cast top off the unit and place to the side.

3. Loosen the four (4) torx T-20 screws holding the face on the unit.

4. Lift the face up and forward to remove from the unit.

5.Attach the surround panel to the face using the eight (8) torx T-20 screws provided (four per side).

6.Replace the face on the unit

and tighten the four torx T-20 screws.

7. Replace the cast top on the unit. The four (4) 1⁄4” screws can be left loose.