Epson 10020, 100 Modifying the DEVICE LIST, Note, Enter, Enter, 0 - Exit, 1 - Add devices, Modify DEVICE LIST, 2 - Delete devices, Enter selection number:

If the list correctly describes your system, press Y and then Enter. If a device is missing from this list, or if you wish to change the list, press N and Enter.

Note

If your system uses an EGA or VGA with a color monitor,

your device list should include item 5, "Color graphics

adapter and CRT." If your system uses an EGA or VGA with

a monocrhome display, your device list should include item 4, "Monochrome display adapter and CRT."

Once you confirm the DEVICE LIST, you can test only those items. If you decide later that you need to add a device, you must return to the OPERATION MENU and re-select System diagnostics.

Modifying the DEVICE LIST

If an installed device is missing from the DEVICE LIST, it is important that you add it to the list and test it carefully. In response to this prompt:

Is the DEVICE LIST correct (Y/N)?press N followed by Enter. You then see a new menu:Modify DEVICE LIST1 - Add devices2 - Delete devices0 - Exit

Enter selection number:

Performing System Diagnostics D-3