3.Insert a blank 5 1/4-inch 360KB diskette in drive B (the bottom drive) and turn the latch down to secure the diskette.

4.Type the following and press Enter.DISKCOPY A: B:The screen displays these prompts:

Insert SOURCE diskette in drive A: Insert TARGET diskette in drive B: Press any key when ready ...

5.Drive A (the top drive) already contains a diskette you want to copy (the source diskette) and drive B contains the blank target diskette, so just press any key. The DISKCOPY program begins the copy process.

If the diskette in drive B is not formatted, the DISKCOPY program formats it. (Formatting prepares a diskette to store data and is described in Chapter 3.) Then the program copies the contents of the diskette in drive A to the formatted diskette in drive B. When the copy is complete, you see this prompt:

Copy another diskette (Y/N)?

6.Press Y so you can make a copy of the Operating 2 diskette. Again, you see these prompts:

Insert SOURCE diskette in drive A: Insert TARGET diskette in drive B: Press any key when ready . . .

7.Remove the original Operating 1 diskette from drive A and the copy from drive B. Insert the Operating 2 diskette in drive A and another blank diskette in drive B. Then follow the instructions above and the prompts on the screen to make a copy of this diskette.

1-22 Setting Up Your System