In addition to the tools supplied with the projector mount, you will need a Phillips head screwdriver and a drill to use on the wall or ceiling.

If you install the projector on the ceiling, you will need to invert the picture so that it appears right side up. Follow these steps:

1.Press the Menu button on the remote control.

2.Press the menu navigation buttons to open the

Settings menu, then select Projection.

3.Use the navigation buttons to select Front/Ceiling.

4.Press the Menu button when done.

Menu button

Menu navigation buttons

If you are planning to use an AV controller with the projector, refer to the table of ESC/VP21 command codes on page 65.

Connecting the Cables

Connecting Video and Computer Equipment

You can connect the projector to any type of video equipment, such as a VCR, DVD player, digital tuner, cable or satellite box, video game console, camcorder, or digital camera. You can also connect it to a desktop or laptop PC or Apple® Macintosh® system.

You can connect up to six pieces of video equipment at the same time, using any of the commercially available cables shown below:

Port name

Video equipment connection*

Computer connection*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI1

Use an HDMI cable:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI2

Use an HDMI cable:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18 Setting Up the Projector