Deleting Saved Memory Settings
You can clear all your memory settings at once.
1.Press the Menu button on the remote control.
2.Open the Reset menu, then select Reset Memory.
3.Press the 
Select button to delete the memory settings.
Note: You can delete memory settings one at a time with the Erase Memory setting under the Memory menu.
Resetting the Projector
If the image quality isn’t what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its
To restore the settings in a specific menu (such as the Image or Settings menu), open that menu, select Reset, and confirm as needed. The example below shows how to reset the Image menu settings:
Open the Image menu . . .
. . . and select
Reset
You can also reset the lamp usage timer or restore all the projector settings to their original values. Follow these steps:
1.Press the Menu button on the remote control.
2.Open the Reset menu.
3.Do one of the following:
■Select Reset Lamp Hours to clear the lamp usage timer and reset it to zero. You should reset the lamp timer only when you install a new projector lamp. See page 52 for more information.
Making Detailed Adjustments 43