■RGBCMY
Image Æ Advanced Æ RGBCMY
Note: This setting cannot be adjusted when Color Mode is set to x.v. Color.
Use the RGBCMY settings to adjust the hue and saturation of the six color components (red, green, blue, cyan, magenta, yellow). After adjusting each color, press Esc to move to another menu option.
■Gamma
Image Æ Advanced Æ Gamma
Note: This setting cannot be adjusted when Color Mode is set to x.v. Color.
You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas.
You can also access this setting by pressing the Gamma button on the remote control. See page 31 for more information.
Adjustments for Computer Images
In addition to the settings described above, you can adjust the Tracking and Sync settings for analog RGB computer images. Normally, these settings are adjusted automatically by the projector. If you notice that the image is blurry or contains dark vertical bands, you may need to adjust the settings yourself.
■Auto Setup
Signal Æ Auto Setup
Note: This setting only appears when a computer signal is being input to the PC port.
Leave this setting on so that the projector automatically adjusts the tracking, sync, and position of the image.
40 Making Detailed Adjustments