Cleaning the Projector Case
Before you clean the case, turn off the projector and unplug the power cord.
■To remove dirt or dust, wipe the case
with a soft, dry,
■To remove stubborn dirt or stains, moisten a soft cloth with water and a
neutral detergent. Then wipe the case and dry it with a dry cloth.
Caution: Never use wax, alcohol, benzene,
thinner, or other chemical detergents. These can damage the case.
Cleaning and Replacing the Air Filter
Your projector includes an air filter to ensure the best performance. If dust collects on the air filter, clean it as described below. Dust clogs prevent proper ventilation and can cause overheating and damage the projector.
1.Press the P Power button and wait for the P Power light to stop flashing. The projector cools down.
2.Turn off the projector using the power switch on the back.
3.Unplug the power cord and disconnect any cables.
4.Use a small vacuum cleaner that is designed for computers and other office equipment to clean the filter on the bottom of the projector. If you don’t have one, gently clean the filter using a very soft brush (such as a clean artist’s paintbrush).
If the dirt is difficult to remove or the filter is broken, replace it. You can purchase air filter part number V13H134A09 from an authorized Epson reseller. To find the nearest reseller, please call
48 Maintenance