Click here

The picture is upside-down or reversed.

Change the Projection setting in the Settings menu (see page 45).

Only part of the picture is displayed, or the picture is distorted.

■Press the Aspect button to select a different aspect ratio (see page 28).

■If the Aspect is set to Zoom, you may need to use the Zoom Caption Pos. option to see the top or bottom section of the screen so that subtitles are visible (see page 44).

■Check the Output Scaling to make sure it’s adjusted correctly (see page 44).

■Use the Position setting to reposition the image on the screen (see page 44).

■If you’ve connected a computer and you see only half the image, make sure the computer’s Dual Display setting is turned off.

The picture isn’t rectangular.

■If the image looks like or , the projector has been placed off to one side of the screen and angled toward it. Face the projector straight ahead (instead of at the center of the screen), then use the horizontal lens shift dial to center the image (see page 25).

■If the image looks like or , make sure the projector is not tilted up or down.

The picture contains static or noise.

■Make sure the Input Signal is set correctly for your connected video equipment (see page 45).

■If you’re viewing still images and you notice flickering or horizontal lines, turn on the Progressive setting (see page 37).

■Make sure your cables are securely connected at both ends.

58 Problem Solving