■Component

Settings Æ Input SignalÆ Component

Change this setting to match the type of equipment connected to the Component port. For component video, select Auto to let the projector automatically interpret the signal; or select YCbCr or YPbPr to manually select your video equipment’s signal. Use YCbCr for digital movie camera input. Use YPbPr for DVD or satellite input.

■Trigger Out

Settings Æ Trigger Out

Turn on this setting if you want the Trigger out port to output a 12-volt signal while the projector is operating. You can use this to raise or lower your projection screen.

■Sleep Mode

Settings Æ Sleep Mode

Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode shuts the projector off automatically when there is no video signal.)

Select 5 min., 10 min., or 30 min. as the length of time before shutoff; decreasing the time conserves power and extends the life of the lamp.

To turn the projector back on, press the On button on the remote control, or press the

P Power button on the projector.

■Child Lock

Settings Æ Child Lock

Lets you lock the P Power button on the projector’s control panel to make it more difficult for a child to turn on the projector. See page 32 for more information.

■Control Panel Lock

Settings Æ Control Panel Lock

Lets you disable all the buttons on the projector’s control panel to prevent the image from being accidentally changed once it is adjusted. See page 32 for more information.

■High Altitude Mode

Settings Æ High Altitude Mode

Adjusts the speed of the fan so it can properly cool the projector at altitudes above 4900 feet (1500 meters).

46 Making Detailed Adjustments