Screen Options

Messages

Settings Æ Display Æ Messages

Turn this setting off if you want to prevent on-screen messages from appearing (such as the no-signal message, or the identifying text that appears when you switch between image sources or color modes).

Startup Screen

Settings Æ Display Æ Startup Screen

Turn this setting off if you want to prevent the startup screen from appearing while the projector is warming up.

Display Background

Settings Æ Display Æ Display Background

Changes the screen that’s used when the projector is not receiving a signal or when you press the Blank button to temporarily stop projection.

Other Setup Options

Projection

Settings Æ Projection

You can select different options for projecting the image: Front, Front/Ceiling, Rear, Rear/Ceiling.

Direct Power On

Settings Æ Direct Power On

Sets projection to start when the main power switch is turned on, without pressing the On button on the remote control or the P Power button on the projector.

Note: When direct power on is enabled, power surges that occur after a power outage can cause the projector to turn on.

Video Signal

Settings Æ Input SignalÆ Video Signal

Leave this setting on Auto so the projector can automatically interpret the format, such as NTSC or PAL (for standard TV formats).

Making Detailed Adjustments 45