Macintosh System Requirements

To use your printer and its software with a Macintosh, your system should have:

■One of the following Macintosh models:

LC475, LC575, LC630 Quadra series Centris series

PowerBook® series (190, 520, 540, 550, or later) PowerBook Duo 280, 2300c/100

Performa® 475, 575, 588, 630, 5210 or later Power Macintosh® series

iMac™ series (for USB connection only)

Power Macintosh G3 (for USB connection only)

■For serial connection: System 7.1 or later (7.6 or later recommended)

For USB connection: iMac with System 8.1 or later

Power Macintosh G3 with System 8.5.1 or later

■At least 16MB of available RAM

■At least 50MB of free hard disk space (100MB recommended)

■RGB display or better

■Quad-speed (4x) or faster CD-ROM drive for installing the printer software

■For serial connection, an ImageWriter® II serial cable or equivalent (8-pin mini DIN male/male, Belkin brand recommended; EPSON part number: F2V024-06)

For USB connection to an iMac or Power Macintosh G3 computer, a shielded USB “AB” interface cable, from Series A (computer) to Series B (printer), up to 6.5 ft. (2 meters) long.

Using an improperly shielded USB cable—especially a cable more than 6.5 ft. (2 meters) long—may cause the printer to malfunction.

5