Epson 1200 Photo Paper (13 in × 32.8 ft roll)

Photo Paper (13 in × 32.8 ft roll)

You can use Banner Photo Paper on a roll to print photographic banners, panoramas, and signs up to 44 inches long. Before loading the paper, cut it to the desired length of your image plus 2 inches to account for the necessary margins.

Make sure the cut sheet is flat; if it curls, flatten it by following the instructions included in the paper package. Then remove the printer’s paper support and load one sheet at a time, printable side up.

load/eject button

Support the paper from underneath or by its edges, then press and release the E load/eject

button to feed the paper into the printer. Select Photo Paper as the Media Type and Banner as the Paper Source setting in your printer software.

An accessory Roll Paper Holder (part number C811062) is also available for use with your printer and EPSON Photo Paper on a roll. Contact your EPSON dealer or call EPSON Accessories at the number listed on page 47 to order the holder.

20