Loading 4 × 5-inch film

Follow these steps to load 4 × 5-inch film:

1. Place the 4 × 5-inch film guide on a flat surface and remove the cover from one of the film holders.

2. Insert the film in the film holder, making sure the glossy (smooth) side of the film faces down and the film emulsion layer faces up. Then close the cover.

Note: Make sure that the film cover is completely closed, and that it holds the film taut without bowing. Bowing can cause distortions in the scanned image.

3.Repeat steps 1 and 2 for all the film you scan.

4.Place the 4 × 5-inch film guide on

the document table. Align it with the ruled edges of the document table as shown.

5. Close the TPU and begin your scan.

If you’re using EPSON Scan, follow these guidelines:

■Choose either Home Mode or Professional Mode.

■In Home Mode, choose the correct Document Type (Positive Film, Color Negative Film, or B&W Negative Film).

■In Professional Mode, select Transparency as your Document Type, then select the correct Film Type.

Using Optional Equipment 25