Fixing Paper Jams

If a paper jam occurs, follow these steps to clear it:

1.Open the automatic document feeder’s cover to determine where the paper jam occurred.

2. Pull forward on the jam-release lever, and slowly pull the jammed paper out of the feeder mechanism. Be careful not to tear the paper.

3. After removing the jammed paper, close the document feeder cover. Make sure the ERROR light is off and the READY light isn’t flashing before trying to scan.

4.If the error isn’t cleared, turn your scanner off and then on again. Also, close EPSON Scan. Don’t restart

EPSON Scan until the green READY light stops flashing.

Note: If you attempt to preview or scan before the scanner is ready, EPSON Scan may stop responding. If this happens, restart your computer.

32 Using Optional Equipment