Installing the Automatic Document Feeder
Caution: Because the automatic document feeder is heavy, you may want to have someone help you with this procedure.
1. Make sure your scanner is turned off.
2. Remove your scanner’s document cover by grasping the back of the cover as shown and easing it straight up.
3. Make sure the document table is clean and dust free.
4.Position the automatic document feeder’s mounting slots over the two mounting screws located at the back of the scanner.
5.Slide the automatic document feeder forward slightly until the two holes in front of these slots are aligned with the screw holes at the back of the scanner.
Don’t remove the foam block until you’re done installing the unit.
Using Optional Equipment 29