Epson 1680 Your image scans at an angle, The edges of the document aren’t scanned, Straight lines in the image come out jagged

The edges of the document aren’t scanned.

■Don’t place your document right up against the edges of the document table. Allow a little space (about 2 mm).

■If colors are patchy or distorted at the edges of the image, the document may be too thick, or there may be outside light interfering with the scan.

Your image scans at an angle.

Check the position of your document. It may be placed at an angle on the document table. Align it so the horizontal and vertical edges are carefully aligned with the scales on the top and side of the document table.

Straight lines in the image come out jagged.

Make sure the document is aligned with the scales on the top and side of the document table.

46 Solving Problems