Epson 1810p Off, 4:3, Auto, Auto, 16:9, ■Sync, PAL60, Normal, Use the, ■Resize, ■Tracking, ■Position, 16:9 (Up), ■Auto Setup, 16:9 (Down), ■Progressive, ■Video Signal

2.Use the pointer button to highlight the desired option, then adjust it as needed:

■Auto Setup

Leave this setting On to automatically optimize computer images. Turn it off if you want to save adjustments you have made to the Tracking, Sync, and Position settings.

■TrackingAdjust this value to eliminate vertical stripes in computer images.■SyncAdjust this value if computer images appear blurry or flicker.■Progressive

For composite video and S-video only. Turn this setting On to convert interlaced signals into progressive signals (best for still images). Leave the setting Off for moving images.

■PositionIf the image is slightly cut off on one or more sides, it may not

be centered exactly. Select this setting and use the pointer button to center it.

■Computer1 Input Computer2 Input

If the colors don’t look right on the Auto setting, select the setting for the type of equipment you’ve connected to the

Computer1 or Computer2 port:RGB: For a computer or RGB-video connection.

Component: For a video player that outputs a component video signal (with connectors labeled Y/Cb/Cr or Y/Pb/Pr).

■Video Signal

Leave this setting at Auto unless you are using a 60-Hz PAL system (then select PAL60).

■Resize

Choose an aspect ratio of either 4:3 or 16:9. For videos, you can also select 16:9 (Up) or 16:9 (Down) to accommodate subtitles or supertitles. Normal is the default setting for a computer connection.

note

You can also use the remote control’s Auto button to automatically reset the projector’s Tracking, Sync, and Position settings. See page 81 for details.

Fine-Tuning the Projector 53