caution

When replacing batteries, take the following precautions:

■Replace the batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash immediately.

■Do not expose batteries to heat or flame.■Dispose of used batteries according to local regulations.

■Remove the batteries if you won’t be using the projector for a long period of time.

The life span of the lamp is about 2500 hours if the Brightness Control setting in the Settings menu is set to High (default), and 3000 hours if the Brightness Control setting is set to Low. Make sure you have a spare lamp handy if the usage hours on this menu are close to the life span of your lamp.

Replacing the Batteries

Replace the batteries in the remote control as described below:1.Turn the remote control over.2.Press down on the tab on thebattery cover as you lift the cover off.3. Install two AAA batteries, inserting the + and – ends as shown.4. Position the cover as shown, then press down until it snaps into place.
70Maintaining the Projector