The message Not Supported is displayed.

■Make sure the correct input signal is selected in the Signal menu (see page 52).

■Make sure your computer’s resolution doesn’t exceed UXGA (1600 ⋅ 1200) and the frequency or refresh rate is supported by the projector (see page 89). If necessary, change your computer’s resolution setting.

Only part of the computer image is displayed.

■Press the Auto button on the remote control.

■Make sure the image Position setting is correct in the Signal menu. See page 53 for more information.

■Press the Resize button on the remote control.

■Press the Esc button on the remote control to cancel the E-Zoom function.

■Make sure your computer’s resolution setting is correct. Ideally, it should be 1024 ⋅ 768 to match the projector’s native resolution. If this option isn’t available, select one of the other compatible video formats listed on page 89.

■You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information.

The image isn’t square, but keystone-shaped.

■If the image isn’t square or rectangular, adjust its shape as described on page 22.

■Enable the Auto Keystone feature to automatically fix the shape when the projector is tilted upward. See page 54.

Solving Problems 79