Epson 1810p The power doesn’t turn on, No image appears on the screen, The buttons on the projector don’t work

Solving Projector Operation Problems

The power doesn’t turn on.

■If the projector doesn’t turn on when you press the P Power button, make sure the power cable is connected to the projector and plugged into a working electrical outlet.

■The power cable may be defective. Disconnect the cable from the outlet and contact Epson as described on page 83.

■Check to see if the A/V mute slide (lens cover) is closed.

The buttons on the projector don’t work.

If the Operation Lock function has been enabled, you can’t use the buttons on the projector. Try using the remote control instead. See page 59 for information about the Operation Lock function.

Solving Problems with the Image or Sound

No image appears on the screen.

■Check that the Power light is green, not flashing.

■The projector may be in standby or sleep mode. If the Power light is orange, press the P Power button to turn the projector on.

■If the power was switched off and then on again, the projector may be cooling down. Wait until the Power light stops flashing and remains orange; then press the P Power button again.

■Press the A/V Mute button on the remote control to make sure the picture has not been turned off temporarily.

■Open the A/V mute slide (lens cover), if it is closed.

■The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer.

Solving Problems 77