Epson 1810p Hold down the, You see this screen:, 56Fine-Tuningthe Projector, 2.Use the pointer button to select Password and press Enter

note

Network Protect is not available for the 1810p projector.

Hold down

You see this screen:

2.Use the pointer button to select Password and press Enter.

3.When you see a message asking if you want to change the password, select Yes and press Enter.

4.Hold down the Num button on the remote control and use the numeric keypad to enter a four digit password. (The default setting is 0000.)

5.When you see a confirmation message, reenter the password. Then press the Menu button to exit the screen.

To set security options, access the Password Protect screen as described above, and then turn on any of the following options:

■Power On Protect to prevent unauthorized use of the projector. After the projector is plugged in and turned on, you must enter a password to use the projector. For details, see page 57.

■User’s Logo Protect to prevent your custom screen and display settings from being changed. None of the User’s Logo features in the Extended menu can be changed when the User’s Logo Protect function is enabled. For details on creating a custom screen, see page 57.

56Fine-Tuning the Projector