Installing the Roll Paper Cutter and Basket
1. Turn off the printer.
2. Press the lever on the left side of the output tray, then gently guide the tray off its mounting tabs, left side first.
Lever
3. Insert the cutter into the top of the opening as shown, and press it in evenly on both sides, until it clicks into place.
4. Position the basket as shown, and slide it onto the guide rails on the bottom of the cutter.
Caution: Don’t install the basket if you’re printing photos longer than 11.7 inches; this may cause a paper jam. The basket holds 40 photos, up to 7 inches long. For longer photos, remove each one after it’s printed.
5.If the cloth on the basket isn’t attached at both ends, lift the free edge of the cloth over the basket frame and attach the loops to the hooks on the frame.
Loading Paper 15