Lights | Explanation | |
|
| |
Green P power light is off or | The automatic roll paper cutter may have a paper jam or be | |
flashes | installed incorrectly. | |
Red m paper light flashes | ■ If the P power light is off, the m paper light is flashing, | |
and all the red H ink lights are flashing, make sure the | ||
| ||
All red H ink lights are | cutter is installed correctly (see page 15). Press the | |
m paper button to clear the error. | ||
flashing or off | ■ If the P power and m paper lights are flashing, and the | |
| ||
| red H ink lights are off, the cutter has a paper jam. Turn off | |
| the printer, remove any jammed paper, and turn the | |
| printer back on. | |
| If you still see the light pattern, contact your dealer or EPSON; | |
| see page 83. | |
|
| |
Green P power light flashes | The printer may have a maintenance request error condition. | |
Red m paper light and | Turn off the printer, wait a few seconds, and turn it on again. If | |
the lights are still flashing, contact your dealer or EPSON; see | ||
all red H ink lights flash | ||
alternately |
| |
|
|
Running a Printer Check
You can run a printer check to determine whether a problem comes from the printer or some other source.
1.Turn off your printer and computer, then disconnect the printer’s interface cable.
2.Load
3.Hold down the m paper button, then press and release the P power button. Hold down the m paper button until the P power light flashes.
4.A test page prints showing the printer’s ROM version number and a nozzle check pattern. (If the pattern has lines, you need to clean the print head; see page 57.)
■If the check page prints, the problem probably lies in your software settings, interface cable, or computer, or your software may not be installed correctly.
■If the check page doesn’t print, you may have a problem with your printer.
Try the suggestions in “Problems and Solutions” beginning on page 76. If nothing works, contact your dealer or EPSON as described on page 83.
5.Turn off the printer, reconnect the interface cable, then turn on your printer and computer.
Solving Problems 75