Epson 220 manual Control Panel Buttons and Lights, Safety Approvals, CE Marking

EPSON LQ-2080

Roll paper

A

B B

printable area

A

AThe minimum top and bottom margins are 0.17 inch (4.2 mm).

BThe minimum left and right margins are 0.12 inch (3 mm). The maximum printable width is 8.0 inches (203 mm).

Safety Approvals

120 V model:
Safety standards	UL 1950
	CSA C22.2 No. 950
EMI	FCC part 15 subpart B class B
	CSA C108.8 class B
230 V model:
Safety standards	EN 60950 (TÜV)
EMI	EN 55022 (CISPR pub. 22) class B
	AS/NZS 3548 class B
Acoustic noise	Approx. 50 dB (A) (ISO 7779 pattern)

CE Marking

230 V model:
Low Voltage Directive 73/23/EEC	EN 60950
EMC Directive 89/336/EEC	EN 55022 Class B
	EN 61000-3-2
	EN 61000-3-3
	EN 50082-1
	IEC 801-2
	IEC 801-3
	IEC 801-4

6 - EPSON LQ-2080

Control Panel Buttons and Lights

Font button

Selects the font.

Font lights

Indicate which font is selected.

Condensed button

Turns on the condensed mode.

Condensed light

Lights up when the condensed mode is on.

Pause button

Stops printing temporarily, and resumes printing when pressed again.

Pause light

❏On when the printer is paused.

❏Flashes when the printer is in the micro adjust mode.

Paper Out light

❏On when no paper is loaded in the selected paper source or paper is not loaded correctly.

❏Flashes when paper has not been fully ejected or a paper jam has occurred.

Tear Off/Bin button

❏Advances continuous paper to the tear-off position.

❏Feeds continuous paper backward from the tear-off position to the top-of-form position.

❏Selects a cut-sheet feeder bin when the cut-sheet feeder is installed.

❏Enters the card mode to print on postcards and envelopes.

Tear Off/Bin lights

❏when continuous paper is in the tear-off position.

❏when bin 1 of the optional cut-sheet feeder is selected.

❏when bin 2 of the optional cut-sheet feeder is selected.

❏when the printer is in the card mode.

= on, = off, = flashing

2/99