Safety Instructions

Follow these safety instructions when setting up and using the projector:

1. Do not place the projector on an unstable cart, stand, or table

2.Do not use the projector near water or sources of heat.

3.Use attachments only as recommended.

4.Use the type of power source indicated on the projector. If you are not sure of the power available, consult your dealer or power company.

5.Place the projector near a wall outlet where the plug can be easily unplugged. Placez I ?mprimante p&s d’une prise de contacte oti la fiche peut e^tre dkbranchke facilement.

6.Insert the projector’s three-wire grounding-type plug into a properly grounded outlet. If you have a two-prong outlet, contact an electrician to replace it. Do not hold the plug with wet hands.

7.Take the following precautions for the plug. Failure to comply with these precautions could result in sparks or fire.

0 Do not insert the plug into an outlet with dust present.

0 Insert the plug firmly into the outlet.

8.Do not overload wall outlets, extension cords, or integral convenience receptacles. This can cause fire or electric shock.

9.Do not place the projector where the cord can be walked on. It may result in fraying or damage to the plug.

Introduction