Epson 5000 Turning the Equipment On and Off, Turning the Projector On and Off

Always turn on the projector and its attached equipment in the following order:

1.Video source (such as a VCR), if your video source is not your computer

2.Audio source (if different from computer or video source)

3 . Projector

4.External amplified speaker or PA system (if necessary)

5. Computer

1.Remove the projector lens cap.

2.Press the Power button on the remote control or control panel. The green power indicator comes on.

If computer or video equipment is attached, the computer or video signal is projected.

Allow about 30 seconds for full illumination.

+warning: Never look into the lens when the lamp is on. This can damage your eyes. It is especially important that children not look into the lens.

Turning the Equipment On and Off