b.Remove the small cover and set the DIP switches on the Macintosh video adapter in accordance with the resolutions you want to use (such as 16 inch mode).

c.Connect the small terminal of the Macintosh video adapter to the other end of the video cable.

d.Connect one end of the video-out cable that came with your Power-Book to the video-out connector on the back of the Power-Book.

e.Connect the other end of the Power-Book video-out cable to the projector video cable (with Macintosh video adapter attached).

f.Tighten the screws on all the connectors to make sure they are fastened securely.

Connecting to a Computer