Note: The computer must be connected and operating, and the image source on the projector must be set to computer for you to access these menu options.

Menu item

Description

 

 

Brightness

Lightens or darkens the overall image. Increase brightness to lighten

 

an image, or decrease it to darken the image.

Contrast

Adjusts the difference between light and dark areas. Increase the

 

contrast to make light areas lighter and dark areas darker. Decrease it

 

to minimize the difference between light and dark areas.

Sync

Synchronizes with the tracking signal sent from the computer. Adjust

 

this setting to correct fuzziness or to remove streaks from the image.

Tracking

Matches the projector’s internal clock to various computer graphic

 

signals Adjust this setting to remove fuzzy lines from the image.

Color

Adjusts the color balance of the input source.

 

Select this item and then press the Enter button (control panel) or

 

either multi-purpose button (remote) to enter the color adjustment

 

mode. Then use the pointer button or up and down buttons (control

 

panel) to select a color.

 

Next, use the pointer button or left and right buttons (control panel) to

 

adjust the selected color. Increase the color setting for more intense

 

color on the screen, and lower the setting for less intense color.

 

When you finish making adjustments, press the Enter button (control

 

panel) or a multi-purpose button (remote) to return to the Computer

 

menu.

 

 

3 • Using the Projector Menus