Changing the Test Pattern

1.Click Test Pattern on the Projector Set dialog box. The following window appears:

2.You can display a test pattern when setting up the projector to verify that the projector is working properly. Choose one of the following:

Color Image Dis plays a color bar test pattern

Gray Scale Displays a gray scale test pattern.

Focus Pattern Displays a character-based focus pattern.

User File(bmp)D’IS plays a bitmapped test pattern from the file name specified. Either type the name or click Ref... (refer) to browse the hard disk for the file. The bitmap should be 800 x 600 pixels (dots).

3.Click Pattern Display to display the test pattern selected. Then click Close.

4 • Using the ELP Link II Software