Using the Remote Control

pointer button

’ bottom multi-purpose button

multi-purpose button

The remote control uses a line-of-sight infrared signal. To use the remote control, point it towards one of the remote control receivers located at the front and back of the projector.

You can use the remote control up to about 33 feet (10 meters) from the projector. (This distance may be shorter if the remote control batteries are low.)

Note: The projector may not respond to remote control commands in these conditions.. ambient hgh t is too bright,’ a certain type of fluorescent light is present; a strong light source (such as direct sunlight) shines into the

Using the Remote Control