The Video menu enables you make adjustments to the projected
image. The following options are available when the image source is
Video.
Note: The video source (such as a VCR or camcorder) must be connected and operating, and the image source on the projector must be set to Video for you to access these menu options.
Menu item | Description |
|
|
|
|
| |
Brightness | Lightens or darkens the overall image. Increase brightness to | lighten | |
| an image, or decrease it to darken the image. |
| |
Contrast | Adjusts the degree of difference between light and dark areas. | ||
| Increase the contrast to make light areas lighter and dark areas | ||
| darker. Decrease it to minimize the difference between the lightest | ||
| and darkest areas of the image. |
|
|
Saturation | Adjusts color density. Increase the setting for darker and more | ||
| opaque colors. Decrease it for lighter and less opaque colors. |
| |
Tint | Adjust the | of the screen. Increase tint | to add |
(NTSC only) | more green, or decrease it to add | more red. |
|
M o d eSpecifies the video signal system. Normally this signal system setting should be left at AUTO to automatically detect the type of video signal. If automatic selection is not possible for some reason, use this menu to manually specify NTSC, PAL, or SECAM.
3 • Using the Projector Menus