Epson 5000 Function, Using the Software, Description and usage

Function Description and Usage

The function list on the left side of the ELP Link II main dialog box shows the functions available for assignment to an Effects button. To assign the functions, see page 67.

The table below describes these functions and how to use them.

Note: To use the Effects buttons, the ELP Link II software must be running and the computer connected to the projector.

Function	Description and usage
Line	Draws a straight line on the screen.
	Press the Effects key assigned to this effect. Then press the bottom
	multi-purpose button once to define the line start position. Move the
	cursor using the remote Pointer button. Then press the bottom
	multi-purpose button twice to define the line end position.
Ellipse	Draws an ellipse (oval) on the screen
	Press the Effects key assigned to this effect. Then press the bottom
	multi-purpose button once to define the position of one end of the
	ellipse. Move the cursor using the remote Pointer button. Then press
	the bottom multi-purpose button twice to define the position of the
	other end of the ellipse.
Square	Draws a square on the screen
	Press the Effects key assigned to this effect. Then press the bottom
	multi-purpose button once to define the position of one corner of the
	square. Move the cursor using the remote Pointer button. Then press
	the bottom multi-purpose button twice to define the position of the
	other corner of the square.

Using the Software