5.Press the red Power button on top of the projector.
The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green, and you may see a blue screen with the No Signal message displayed. This is normal.
power light
Power button
6.Do one of the following:
■If you’re projecting from a computer, turn on or restart your computer. In a few moments, you should see your computer display projected.
If you see a New Hardware Wizard message saying that it has found a
■If you’re projecting a video, press the Play button on your video source.
If a projected image fails to appear, see the next section for help.
Once you see your image, turn to page 24 for instructions on focusing and making other image adjustments.
When you’re done with your presentation, shut down the projector as described on page 29. Shutting down the projector correctly prevents premature lamp failure and possible damage to the projector from overheating.
warning
Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children.
Using the Projector 21