If the image still isn’t large enough, you may need to move the projector farther away from the screen. You can also use the E-Zoombutton on the remote control to zoom in on a portion of the image. See page 35 for instructions.

Adjusting the Height of Your Image

If the image is too low, you can raise it by extending the projector’s foot.

1.Stand behind the projector. Press the foot release button and lift the front of the projector. This unlocks the foot.

back adjustable foot

foot release button

2.Once the image is positioned where you want it, release the button to lock the foot in position.

3.If you need to straighten the image, rotate the round adjustable foot at the back of the projector.

If the image is no longer square after raising it, see the next section.

Using the Projector 25