Power Help

Computer/YCbCr Video

Source

MenuEsc

Sync+

Tracking - Auto Tracking +

Controlling the Projector

While giving your presentation, you may want to switch between picture sources, adjust the volume, or temporarily turn off the picture and sound. Follow the instructions below to access theses features from your projector’s control panel. You can also access these features, plus many others, using the remote control as described in Chapter 3.

Switching Between Picture Sources

If your projector is connected to more than one computer and/or video source, you can use the buttons on the control panel (or remote control) to switch between the different sources.

On the projector’s control panel, press the Computer/YCbCr button to switch between computer sources and component video. Press the Video button to switch between standard (composite) video and S-Video.

After you select a source, the screen goes dark for a moment before the image appears.

A/V Mute button

note

You can also have an image, such as a company logo, display on the screen whenever you press the A/V Mute button. See page 51 for instructions.

Adjusting the Volume

If your presentation includes sound, you can adjust the volume from the projector’s control panel. Press the left or right side of the Volume button.

Turning Off the Picture and Sound

You can use the A/V Mute button on the control panel to darken your screen and turn off the sound. This is useful if you want to temporarily re-direct your audience’s attention without the distraction of a bright screen.

■To turn off the picture and sound, press the A/V Mute button. The screen goes dark.

■To turn the picture and sound back on, press the button again.

28Using the Projector