User's Logo Capture
Set the zoom rate.
zoom rate :
100 
200 
300
:Return 
:Select 
:Execute
4.Use the Tracking and Sync buttons (control panel) or the 
button (remote control) to select the area of the image you want to use. Then press 
.
5.When you see the message “Do you use this image?” select Yes and press 
.
You see the screen shown at the left.
6.Use the Tracking and Sync buttons (control panel) or
the 
button (remote control) to select a zoom rate (display size), and then press 
.
7.When the message “Do you save the user’s logo?” appears, select Yes and press 
.
Saving the logo may take a few moments. Do not use your projector or video source (computer, DVD player, etc.) while the logo is being saved.
8.When you see the message “Saving the user’s logo is completed,” press Esc to return to the menu screen.
note
You can also set up your image as the startup screen using the Advanced menu; see page 55.
Choosing When to Display the Image
After your image is saved, you can set it up as the
1.Press the Menu button to display the menu screen (if not already displayed).
2.Use the 
Sync– button (control panel) or the 
button (remote control) to highlight the Setting menu.
3.Press the 
button to select the Setting menu.
4.Use the 
Sync– button (control panel) or the 
button (remote control) to highlight either
Mute, depending on when you want the image to display.
5.Use the 
Tracking+ button (control panel) or the 
button (remote control) to select Logo. This sets your image as the screen
to be displayed.
6.When you’re finished, press Esc or Menu to exit.
52