Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the projector’s menu.
1.Press the Menu button on the control panel or the remote control. You see the main menu.
2.Use the Sync– button (control panel) or the 
button (remote control) to highlight About.
You see the lamp usage hours and other settings.
3.Press 
to select Reset Lamp Timer. Press 
again. You see this prompt:
4.Select Yes, then press 
.
5.When you’re finished, press Esc or Menu.
Maintaining and Transporting the Projector 65