3.Connect one end of the computer cable to the projector’s
Computer 2/ Component Video port, as shown.
Computer2/Component Video port
Macintosh desktop adapter (if needed)
4.Connect the other end of the computer cable to the video port on the Macintosh. If it doesn’t fit, you may have to use a Macintosh desktop adapter, which you can buy from EPSON (see page 8).
To use the adapter, remove its cover as
shown and set its DIP switches according to the resolution you want to use, such as
Replace the cover and connect the adapter to the free end of the computer video cable. Then plug the cable (with the adapter) into the video port on your Macintosh.
5. Tighten the screws on the connectors.
Appendix A: Connecting to Additional Equipment 89