Saving and Recalling Computer Settings
When you are projecting from an analog computer source, you can save and recall settings (resolution, tracking, sync signal, and position) in up to five different combinations. This is useful if you use more than one computer with the projector; you can save the settings for each one and recall them when necessary. Follow these steps to save the projector’s current settings:
1.Press the Menu button to display the Main menu.
2.Press the 
button to select the Video menu.
3.Use the 
Sync– button (control panel) or the 
button (remote control) to move down to the Preset option.
4.Press 
. You see the Preset Selection menu with the current resolution setting displayed.
5.Use the 
Sync– button (control panel) or the 
button (remote control) to select the number to which you want to assign
the current settings.
6.Press 
. If you see an Overwrite? prompt, select Yes and press 
.
7.Press Esc or Menu to exit.
When you want to use a saved setting, press the Preset button on the remote control. You see the selected setting displayed on the screen.
To select another number, press the Preset button again until the setting number you want is displayed. The projector resets itself according to the selected setting.
48