Follow these steps to replace the lamp:
1.Turn off the projector, wait for it to cool down (when the light stops flashing), then unplug the power cord.
2.Allow the projector to cool for at least half an hour (if it has been on).
3.Use a screwdriver to slide the latch and pop open the lamp cover. Then lift up and remove it.
4.Use a screwdriver to loosen the two silver screws holding the lamp in place. (You can’t remove these screws.)
warning
Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury.
Maintaining and Transporting the Projector 63