Connecting the Mouse Cable

To use the remote control as a wireless mouse, you need to connect the USB mouse cable.

1.Connect one end of the USB mouse cable to the USB Mouse port on the projector.

2. Connect the other end to the USB port on your Macintosh.

If you don’t need to make any other connections, you can plug in and turn on your equipment; see page 21 for instructions.

Connecting the Audio Cable

If you’ll be using audio through your projector’s speakers, you’ll need to connect a stereo, mini-jack audio cable (not included).

1.Connect one end of the audio cable to the Audio In port on the projector.

2.Connect the other end of the audio cable to the audio-out port on your Macintosh.

note

Your Macintosh must be using Macintosh OS 8.51 or later for USB support.

See page 32 for instructions on using the remote control as a wireless mouse.

note

If you need additional volume (in a large auditorium, for example), you can also connect external speakers or a public address system; see page 21 for instructions.

Setting Up the Projector 17