note

You can’t use the projector with a cable TV-style

F connector.

If you don’t need to make any other connections, you can plug in and turn on your equipment; see page 21 for instructions.

Connecting to Video Sources

You can connect a DVD player, VCR, camcorder, laser disc player, digital camera, or any other compatible video source to your projector. You can connect one video source and a computer at the same time, and easily switch between them. The projector supports HDTV, NTSC, PAL, and SECAM formats, and automatically detects the one you’re using.

Connecting the RCA A/V Video Cable

Before you start, make sure the projector and your VCR or other video source are turned off.

1.Connect the yellow plug on one end of the A/V cable to the projector’s yellow Video jack.

2.Connect the other yellow plug to the video-out jack on your video source.

3.Connect the red and white plugs on the A/V cable to the projector’s Audio L (white) and R (red) jacks.

RCA

audio/video cable

4.Connect the red and white plugs at the other end of the cable to the corresponding audio output jacks on your video source.

18Setting Up the Projector