Adjusting the Image Height

If your image is too low, you can raise it by extending the projector’s feet.

1.Stand behind the projector. Pull up the blue foot release levers and lift the front of the projector. This unlocks the feet.

2.Raise or lower the front of the projector as necessary.

3.Once the image is positioned where you want it, release the levers to lock the feet into position.

4.To fine-tune the height, rotate the feet clockwise to raise the projector and counterclockwise to lower it.

caution

To avoid damaging the lens, do not lift the projector by the lens.

note

If the image shape is not square after adjusting its position, see the next section for a solution.

counterclockwise to lower it

clockwise to raise it

Using the Projector 29